06 · Atelier

Made on the bench.


A builder’s lid cannot be welded. The film that replaces it is cut here, at 3 Yad Harutzim Street, to the diagonals taken on the visit. The apartment is not the workshop.

An aluminium ceiling profile on a dark bench, with a clear harpoon edge beside the track
The harpoon edge and the aluminium track. Unbranded. Cut to the perimeter of one room.
MatteThe bay, when the builder’s lid should go quiet.
460 ₪Cove light, per linear metre, profile and tape. VAT included.
1 hourA single room on the visit. Several rooms take the morning.
340 ₪Matte, per square metre. Billed at not less than 8 m².

01

Cut

The film is cut to the measure: length, width, both diagonals, and the drop agreed on the visit. Not to a catalogue room.

02

Weld

PVC is heat-welded, and the harpoon is welded to the edge. A print, if the drawing asks for one, is on the film before that weld.

03

Leave

The plane goes back as one membrane for that room. Most rectangular rooms are then fitted in a day. A star field, a print, or a dense run of openings takes longer, and the quote says so.

The door

Company
Gildspan Planes Ltd., גילדספאן פליינס בע״מ, Co. No. 516284734
Bench
3 Yad Harutzim Street, Montefiore, Tel Aviv-Yafo 6777895
Hours
Sunday–Thursday 08:00–17:00. Friday 08:00–13:00. Saturday closed.
Desk
053-684-2170, desk@ceilcraft.pro

There is no gallery at this address, and no row of ceilings to walk under. If you want to see the film, say so in the visit note and a piece comes to the apartment. The door is a workshop door. Come in open hours only when the desk has named the hour. Saturday it stays shut.

What is finished here

Acoustic film is micro-perforated. The lining is cut for the void only when the visit showed the void can hold it. If it cannot, the quote drops, and we say why. Star points are set by hand. The engine is placed in the void on the fit day, where it can be reached later. The electrician connects it.

A plane we fitted can be re-seated after a leak from above, or opened for a new lamp ring. That is booked as a visit. There is no repair menu on this page. The figure is on the written note.

Ask for a measure

Six membranes.

01MatteThe quiet field. Living rooms, bedrooms, halls.340 ₪ / m² 02SatinA low sheen. Soft rooms that still want depth.360 ₪ / m² 03LacquerA dark mirror. Small rooms, dining, a hall.410 ₪ / m² 04AcousticA micro-perforated plane for a bedroom or a study.450 ₪ / m² 05StarFibre points, set by hand. One light engine in the void.760 ₪ / m² 06PrintedA photograph welded into the film, when the drawing asks.520 ₪ / m²

Guides for 2026, shekels per square metre, VAT at 18% included. Each room is billed at not less than 8 m², and a star room at not less than 10 m². An 18 m² matte room is 6,120 ₪, of which 933.56 ₪ is VAT.

01 · The lid

Read what the builder left.

A stained slab, a bulkhead, paint over a joint, a spotlight cut crooked. That lid is still a lid. Lacquer will show every bow in it. Matte will not. The membrane is decided from the slab, in the room, not from a photograph.

02 · The bay

Then the sheen.

Matte when the room should go quiet. Satin when window light should move and leave. Lacquer when the ceiling is asked to hold the lamp. Acoustic only if the void can take a lining. A star field only if the engine stays reachable. The film is cut at the bench.

03 · The line

Light is named last.

A cove at 460 ₪ a metre, rings for the spots already there, or fibres set by hand. A new electrical point belongs to a licensed electrician. We decide the opening. When the lid, the bay, and the line are named, the quote can be written. The cove is on Light.

The hour

The visit, in order.

One room is about an hour. The same six steps are written on the visit. Film is ordered only after the quote is approved.

01
Corners

Someone opens the door. The perimeter has to be reachable. A sofa can stay. A room stacked to the ceiling cannot.

02
Diagonals

Length, width, both diagonals. A wall out of square is cut as that wall, not as a rectangle on a drawing.

03
The drop

From the slab to the line of the profile, and what that line meets: plaster, tile, a curtain recess.

04
The void

Depth for a lining, a driver, or an engine someone can reach later. In a bathroom, the fan and the shower.

05
Openings

Spots, a detector, a diffuser, a sprinkler we do not move. The ring is ours. The circuit is the electrician’s.

06
The note

The quote is written from this hour. You approve it in writing. Until then, nothing is welded, and the hour itself was only a request.